Type A

FIBC bags are the most basic form, made from standard woven polypropylene fabric. These bags do not offer any protection against static electricity. When dry, flowable materials are filled or discharged from these bags, friction can generate static buildup, which poses a risk in flammable environments. Therefore, Type A bags are suitable only for non-flammable products and should never be used to store or transport combustible or hazardous materials. They are also not recommended in high-temperature or dust-laden environments where static discharge could pose a threat.

Type B

FIBC bags appear similar to Type A in construction but are made with materials that have a lower breakdown voltage, helping to reduce the risk of propagating brush discharges. While they do not dissipate static electricity completely, they can safely be used to store or transport dry, combustible powders in environments where flammable gases or vapors are not present. However, caution must still be exercised to ensure that the exterior of the bag is kept clean and free from any flammable or conductive substances that could potentially cause an external ignition.

Type C

FIBC bags, also known as conductive or groundable bags, are constructed with woven conductive threads that must be properly grounded during filling and discharge operations. These bags are designed to safely dissipate static electricity, making them suitable for the transportation of flammable materials and for use in environments where flammable gases, vapors, or dust are present. However, for Type C bags to function as intended, grounding is essential. If grounding is not maintained or if any part of the bag—such as the conductive threads, lifting loops, or seams—is damaged, the bag may lose its protective capabilities. Regular inspection is crucial to ensure safe use.

• 4-PANELThe industry standard, 4 separate panels are sewn together along the seams with a single piece being sewn along the bottom.
• U-PANELOne piece of fabric forms 3 sides, two opposite sides and bottom. Two additional sides are sewn into the larger piece to form the bag.
• CIRCULAROne piece of fabric forms all 4 sides of the bag with a single piece sewn on to the bottom and top.
• BAFFLEBaffle bags have additional pieces of fabric sewn across each corner to allow the bag to retain its square shape when filled. Baffle bags can hold up to 30% more volume per bag when utilizing the same footprint, allowing for enhanced stability when stacking and enhanced space optimization when storing and transporting. There are two varieties: Standard Baffle and Net Baffle.

• CORNER LOOPEach loop is sewn into the seams in the corners of the bag.
• CROSS CORNEREach loop is sewn into one side of the FIBC.
• DOUBLE STEVEDORETwo straps put through each set of lift loops to allow easy moving by forklift.
• SINGLE STEVEDOREA single strap is put through all four loops to allow lifting from multiple sides.
• SLEEVE LIFTMade of the same woven polypropylene as the bag, they are made for use with forklifts.

• OPEN TOPStandard bulk bag construction with an open top, just as the name implies.
• DUFFLE TOPLightweight top panel to provide better filling options and also a closure.
• SPOUT TOPCylindrical spout sewn on the top panel of the bag. Works best for more specific applications.
• SPOUT TOP w/ FLAPCylindrical spout top with additional flap for added coverage over the sealed spout.
• CONICAL SPOUT TOPCylindrical spout top with a high filling cone for specific applications.

• FLAT BOTTOMStandard bottom construction with no means of discharge.
• DISCHARGE SPOUTStandard discharge spout for easy removal of bags contents.
• CONICAL DISCHARGE SPOUTA conical shaped discharge spout for easy removal of bags contents.
• DISCHARGE SPOUT w/ FLAPStandard discharge spout for easy removal of bags contents with an additional flap for extra coverage.
• DUFFLE BOTTOMLightweight box type bottom panel that provides quick and easy discharge of bags contents.

• VENTILATEDVentilated FIBC Bag is a specially designed FIBC Bag with air vents along the woven fabric on its body. This is a kind of mesh fabric that allows easy air flow to the contents inside and prevents moisture build-up.
• CONDUCTIVEConductive bags are a type of bulk bag that are designed with conductive fabric or thread to provide static protection during the transportation and storage of flammable or combustible materials. Conductive FIBC bags are also known as Type C bags.
• CONTAINER LINERA Container Liner Bag is a protective packaging bag designed for shipping dry bulk cargo in a safe and controlled environment. These bags are placed inside shipping containers to form a protective lining between the cargo and the container walls. Thus, the packed product is safer than in any sack or standard packaging option.
• PLATENE BAGSPlaten bags are designed to directly replace traditional metal captains or trash cans. They are woven from polypropylene and have a very high strength and weight ratio. The size of the platen bag is larger than traditional bulk bags, and the usable capacity is 0.7-3 cubic meters.
• GAMBO LINERA Gambo Liner is a form-shaped PE liner and allows optimum utility of the bag corner where the material does not flow freely. Gambo Big Bags serve the same purpose as Baffle Bags, but their construction is slightly different. It is designed to maximize the storage and transportation space.

BAHETI GROUP has a robust production capacity of up to 800 metric tonnes per month for manufacturing high-quality FIBC (Flexible Intermediate Bulk Containers) Bags. With ongoing expansions in infrastructure and technology, the group is strategically scaling up operations to exceed 1,000 metric tonnes per month in the near future. This growth reflects BAHETI GROUP’s commitment to meeting rising global demand and strengthening its presence in international markets.